Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So, how’s it going?

    • @DaveOPMA
      link
      110 months ago

      Bought one of those as well! You previously mentioned them so I got one.

      With the humidity sensor, it reports the last update was almost an hour ago. Does that mean it’s no longer connected? I can’t seem to see any indicator in HA as to whether something is currently connected or not.

      • @sylverstream
        link
        210 months ago

        In HA if you go to the device, there’s an option Zigbee info which shows latest seen.

        If humidity doesn’t change it won’t update it, to save battery, at least that’s how I understand it.

        At the start I’ve struggled a lot with devices that became unresponsive. Adding a bunch of mains powered devices solved that.

        • @DaveOPMA
          link
          110 months ago

          Thanks, I’ll keep an eye on it. It’s literally sitting right next to the Skyconnect dongle so shouldn’t be a range problem. I’m pretty sure the temperature would have changed so I’ll try re-pairing and see if that helps.

          If it goes out of range then back in, does it automatically reconnect? And do you know if the button on the humidity sensor does anything other than holding it in for 5 seconds puts it in pairing mode? Wondering if you press it briefly does it turn it off or reset the connection or anything.

          • @sylverstream
            link
            210 months ago

            So… Zigbee should be self correcting / fixing. But I’ve had sensors become unresponsive and had to re Add them to ZHA. Don’t have to delete them first.

            The button wakes up the sensor if pressed briefly, something you should do when you click reconfigure. I’ve never had luck with reconfigure though.

            • @DaveOPMA
              link
              210 months ago

              Thanks, that’s helpful! I’ve readded and it seems to be working now. Humidity went from 48% at 20C to 65% at 20C in an hour or two, presumably from cooking dinner.

              • @sylverstream
                link
                210 months ago

                Great that it’s working! Enjoy :) And yes it’s interesting to see the charts.

                • @DaveOPMA
                  link
                  210 months ago

                  Thanks for all the help!

                  • @sylverstream
                    link
                    210 months ago

                    Glad to help! Any questions, just ask :)