Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So, how’s it going?

  • @DaveOPMA
    link
    110 months ago

    Thanks, I’ll keep an eye on it. It’s literally sitting right next to the Skyconnect dongle so shouldn’t be a range problem. I’m pretty sure the temperature would have changed so I’ll try re-pairing and see if that helps.

    If it goes out of range then back in, does it automatically reconnect? And do you know if the button on the humidity sensor does anything other than holding it in for 5 seconds puts it in pairing mode? Wondering if you press it briefly does it turn it off or reset the connection or anything.

    • @sylverstream
      link
      210 months ago

      So… Zigbee should be self correcting / fixing. But I’ve had sensors become unresponsive and had to re Add them to ZHA. Don’t have to delete them first.

      The button wakes up the sensor if pressed briefly, something you should do when you click reconfigure. I’ve never had luck with reconfigure though.

      • @DaveOPMA
        link
        210 months ago

        Thanks, that’s helpful! I’ve readded and it seems to be working now. Humidity went from 48% at 20C to 65% at 20C in an hour or two, presumably from cooking dinner.

        • @sylverstream
          link
          210 months ago

          Great that it’s working! Enjoy :) And yes it’s interesting to see the charts.

          • @DaveOPMA
            link
            210 months ago

            Thanks for all the help!

            • @sylverstream
              link
              210 months ago

              Glad to help! Any questions, just ask :)