Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So, how’s it going?

  • @NoRamyunForYou
    link
    310 months ago

    What type of Temp/Humi Sensor are you using?

    To start off, I’m looking to get all the various “smart/iot” type devices connected and controlled in one place. Don’t have a lot at the moment - some heatpumps, arlec devices etc.

    • @DaveOPMA
      link
      310 months ago

      To get started, I just got one of each of the plug and sensor that @[email protected] suggested in this comment.

      I haven’t found a use for the smart plug yet. I thought of one thing, but it was down the other end of the house. As I understand it the smart plugs act as repeaters, so I probably need to get some more and spread them around the house so it can reach where I want it.

      I’ve considered an IR blaster as the next step, to control the heat pump.

      • @NoRamyunForYou
        link
        210 months ago

        I’ve been meaning to learn about Zigbee / Z-Wave, but have procrastinated away every time I try to do so :)

        How are you liking those sensors? Might look at getting some.

        • @DaveOPMA
          link
          210 months ago

          Well, my first experience wasn’t great. It says to take the back off to take out the plastic in the battery to connect it, but getting the back off was hard. Ended up prying it off with a screw driver hoping I wasn’t gonna break it.

          And then (probably unrelated) the switch on the side didn’t work. I thought there’s no point stopping now, so I pulled the cover off and found the switch wasn’t well attached to the board. It would wobble back and forth, so I got some cardboard and folded it up, jammed it behind the switch to hold it in place.

          It’s all working great now! But not a great first impression.

          I haven’t used the smart switch except to try to connect it from about 10M away from the zigbee controller, through two walls. It didn’t work, but I managed to get it recognised by trying a bit closer, but haven’t actually done anything else with it. I’m considering buying a 5 or 8 pack and spreading them around the house to get a good network going.

          • @NoRamyunForYou
            link
            210 months ago

            Hmm, maybe I should keep looking haha.

            I’m probably a bit too paranoid, but did you have any concerns around using Mains Plugs from Aliexpress?

            • @DaveOPMA
              link
              210 months ago

              Hmm, maybe I should keep looking haha.

              They aren’t expensive, so it probably is an appropriate quality for the price. But if you do find something better, let me know!

              I’m probably a bit too paranoid, but did you have any concerns around using Mains Plugs from Aliexpress?

              Not until you mentioned it just now 😆. To be fair, they are likely made in the same factories as the cheap plugboards you get from briscoes or the supermarket. These ones are CE certified, so are probably ok. Probably try to avoid anything super cheap.

              We have smoke alarms in pretty much every room because I’m normally a bit paranoid about this stuff too.

              • @NoRamyunForYou
                link
                210 months ago

                Not until you mentioned it just now 😆

                😂 Hopefully I haven’t awaken any extra paranoia. But agree, probably all made in the same places. The certification sounds good though.

                We have smoke alarms in pretty much every room

                On that note, looking for some smoke alarms, and didn’t realize there was such a wide variety! From the cheapo old school reliable ones all the way to really expensive supposedly “smart” alarms.

                • @DaveOPMA
                  link
                  1
                  edit-2
                  10 months ago

                  Mostly we have filled out house with mostly these ones. Mitre 10 has three packs where one is a temp only sensor, for kitchens. So you can have kitchen ones but they trigger on a sudden increase in temperature not on smoke.

                  We tried another brand Orca they sell as well, but they seem to fail pretty often (as in, one just would constantly make it’s “fire!” noise as soon as you put the battery in. Others will just start beeping after a year or two and you can’t get replacement batteries (they are supposed to last 10 years).

                  • @NoRamyunForYou
                    link
                    210 months ago

                    Saw those ones when we went to Mitre10 the other week. Good to hear they have been working well for you. Those smaller footprint ones do look nicer.