Like for example, how someone thinks because you work in IT you can fix their TV, or how if you’re into music you must be able to play any random instrument.
I just like hearing pros rant about about their very niche problems.
i like linux
people think i’m a hacker because i use the terminal sometimes
i don’t know shit bruh
I write electronic music. Misconception is that some assume people actually listen to my music.
Yes, women CAN work on cars, and be good at it.
No, not every mechanic is trying to screw you over.
Yes, all the work/the price I quoted IS accurate. There are other parts that interact with the part you broke. Having a race car isn’t cheap.
No, we can’t just put a new valve in the head, since you bent the old one, and fucked up the seat, guide, etc in the process.
Yes, I know A LOT about Mazda/Nissan, specifically, but I’m not an encyclopedia. Sometimes I do have to look shit up, as much as it annoys you.
No, I don’t know what’s wrong with your car from a 3 word description by you. I’m not psychic.
Yes, we have a scan too, but, no, it doesn’t tell you exactly what’s wrong. It points you in the right direction, sure, SOMETIMES.
No, I’m not being lazy, your car isn’t doing whatever intermittent issue you were complaining about.
deleted by creator
Not infuriating but intriguing, when I worked in safety car crashes a lot of people asked me if I was inside the car during the crashes… Never thought that would be the first thing coming up to mind to people but it did happen a lot.
As somebody that’s involved in Linux and Software Development, being constantly asked to “look at my computer”
Look, I probably can? But I’m not going to, and certainly not for free. I haven’t used Windows in years, and honestly, I mostly go out of my way to avoid knowing anything about what’s going on in Windows-land. I’m going to be sitting there websearching for random stuff just like you are. Take to the geek squad, or something. I don’t wanna.
As somebody that works on his own stuff, and has worked as a Professional Mechanic in a past life?
No, I don’t really want to look at your grocery getter. No, I don’t get any special deal on parts pricing. No, I’m not actually going to be cheaper than taking it to a shop, in many cases. No, the mechanics at the shops probably aren’t giving you an unlubed and unwilling anal probing. They’re expensive for a reason.
Whenever people find out I have a math degree, they tell me how bad they are at math. They seem almost proud about it. Nobody ever brags about being bad at English. They also assume I’m really good at arithmetic or counting, a la Rain Man or something. I am not.
What’s 1+1?
If 1>0 and 1<2
Then 1+1>0+0 and 1+1<2+2
So we know that 0<1+1<4
Thus, 1+1 has to be 1,2, or 3.
More cannot be surmised with the given information.I like how this quietly but accurately calculates the result of 2+2, but somehow cannot handle 1+1.
The most obvious one I’ve come across is when people learn fountain pens still exist their first assumption is you use it for art, specifically calligraphy.
They are literally just pens. You can use them for anything you would normally do with a pen, and in fact most nibs are not really tuned for any kind of calligraphy at all (and in most cases that would be better done digitally, with brushes, or with special markers these days).
Also my handwriting is shit so I’m just salty lmao.
As a software developer, it’s assumed that I’m up to date on all the newest tech trends, and I can accurately inform people on where these trends will be going.
No, AI won’t replace you today.
AI is the worst it will ever be today.It might replace you in the future, but I can’t tell you how far from now that future is.
No I don’t know when we’ll be doing commercial space travel.
No I can’t fix your printer.
I’m just here to make sure some numbers appear on a screen when someone asks for them.
Conversely, I work in IT Support and I get asked programming questions far too often… even to the point where I’m asked to fix applications despite not being a dev.
Then again, I basically have to deal with anything that’s got a plug on the end. I guess code falls into that category in some peoples’ heads.
I have been a machinist/model maker for 10 years now.
No, I can’t just take your .prt/.iges/.stl/.stp file and “load it into the machine and press the green button”.
I use that quote because it was said to me by a particularly arrogant engineering intern. Machining is a complex trade that is made to seem simple because of software and modern automation. While that is fantastic for my profession, it brings with it this idea that I’m not really doing all that much work. Reality is that I’m constantly applying my knowledge of the trade and the things I do might be subtle to the onlookers, but there was a lesson learned before now that took me hours or days to overcome. I train a lot of our machining interns now who are mostly folks in the 20-25 years old range and every single on of them so far as had that humbling moment of “Oh I learned about this in the classroom and did it on the simulator, I know exactly what I’m doing” only to fail. Its a great line of work that is very satisfying for a lot of reasons but it does grind my gears when its portrayed as being unskilled or easy.
I think a lot of people would benefit from learning on manual machines. I had this misconception in my early twenties, but watching (and then using) manual machines was really helpful.
Look, I know my model has a hole that turns 90 degrees midway through. Just make your machine do it.
“It looks great on CAD”
When I was an active in a band, “You should play our _________ (usually a very busy bar or restaurant), we can’t pay you, but it’ll be great exposure.”
When I was an active in a band, “You should play our _________ (usually a very busy bar or restaurant), we can’t pay you, but it’ll be great exposure.”
I am a Windows and Cloud administrator. As soon as people hear cloud and computers, they start thinking that I am personally involved with building the metaverse and could work for NASA. Meanwhile, all the people on the technical sites and subreddits inflame my imposter syndrome every day.
Every time someone learns that I build PCs as a hobby, they almost all ask me about things relating to electrical engineering. Look, socketing a CPU isn’t rocket science. And no, I can’t fix your computer.
If you can’t fix my computer can you fix my wifi instead?
After I get done with your printer.
I’m a linguistics enthusiast, which means people expect me to either know a lot of languages (which is, honestly, partly true) or be a grammar nazi (which is emphatically untrue).
I just dislike people typing to when they mean too. And enjoy reading some etymology from time to time.
Does that make me a linguistics enthusiast to?I usually don’t care about typos as long as the message gets across, but for some reason the too/to mix up really gets me riled up. I instinctively get cross and have to tell myself to chill tf out
Lol, agreed, some typos are not a problem. But other times, words like to/too, I read as completely different words. And often, that “typo” (I think people honestly are just using the wrong word, not mistyping) will require me to
- Read
- Recognize the error
- re-read knowing that there is an error
Which is aggravating.
I’m a machine operator in mining. Usually seen as the drop kicks/ dumb dumbs on site by the “educated” geologists/management.
They pull extra hours unpaid, constantly in meetings, stressing over deadlines. I push dirt around.
They racked up large student debt, I got paid to learn on the job.
I love my job, I’m alone in an aircon cab playing in a “sandpit”, I live my inner childs dream. But somehow I failed at life?
Real question, is your personal job dangerous? I know mining in general is dangerous, but curious which parts are and which parts are not.
There are 2 types of mines: open pit and underground (tunnels, etc). Open pit: they dynamite certain areas, then get big trucks to haul the rubble. They keep going until all of the minerals have been extracted. Example: nickel mines in Cuba. IMO, not very dangerous as long as safety precautions are followed. There is some risk that the walls of the open pit mine might collapse.
Underground: this is the type of mining with real danger. Anytime you hear of a mining incident, it’s likely to be underground. They do take a LOT of precautions which is why modern mining is a lot safer compared to 80 years ago. The ever present danger is collapse of the tunnel or formation.
Sort of. Open Pit mining can be incredibly dangerous, the dangers are just different. I haven’t ever seen any numbers from MSHA breaking down the incident rates (I haven’t looked to see if they even publish them, in a broken down form like that), but you can really get your ass in trouble in an open pit mine, if you’re not cognizant of the highwall, keep track of the very large equipment, Not paying attention to blast times or barricading, or not paying attention to the Shovel Cables, and where the approved crossings are.
I’d suspect that the numbers of overall incidents are probably higher underground, but I’m not sure about actual deaths. I spent about 20 years working in/around/as a vendor to both open pit and underground operations, and just completely anecdotally, I mostly remember most of the underground reportable incidents to be less serious than the ones I saw in the pits.
