• Gork@lemm.ee
    link
    fedilink
    arrow-up
    18
    arrow-down
    1
    ·
    8 months ago

    That thing looks like it can cause some serious damage, even to things that are relatively well hardened.

    Like, what would happen if a sniper fired that gun into the barrel of a T-80 that had an HE shell loaded?

    • Fatmaninalilcoat@lemmy.one
      link
      fedilink
      arrow-up
      20
      ·
      8 months ago

      Don’t have to hit the barrels they usually aim for weak spots hoping for penetration then the round bounces around inside taking everyone out.

      • The_v@lemmy.world
        link
        fedilink
        arrow-up
        18
        ·
        8 months ago

        Anti-material rifles were initially designed to take out tanks. However all modern tanks have thick enough armor to deflect its bullets.

        Now APC’s, trucks, vans, and most engines and electronics are destroyed by these rounds. Hence the anti-material label now.

        • Treczoks@kbin.social
          link
          fedilink
          arrow-up
          9
          ·
          8 months ago

          Given some of the antique tanks the Russians pulled out of the moth ball heap, it might still be an anti-tank-weapon occasionally …

        • worldsayshi@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          8 months ago

          Would it be possible to ruin the barrel by shooting at it from the side? Or would it just ricochet?

          • The_v@lemmy.world
            link
            fedilink
            arrow-up
            15
            ·
            8 months ago

            The barrel is thicker than the armor on tanks. Usually they weigh in at over 2 tons of steel. The circular shape also makes it very likely to deflect the impact like sloped armor.

            It might make a little ding in the paint.

    • FireRetardant@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      8 months ago

      It would be hard to get the angle just right to get the bullet all the way down the barrel without it impacting the sides of the barrel

      • Hopfgeist@feddit.de
        link
        fedilink
        arrow-up
        4
        ·
        8 months ago

        Bullets are deflected along surprisingly sharp bends in a barrel (or any other pipe), so it would be sufficient to hit the tank gun muzzle roughly from the front, and it would probably hit a loaded projectile.

    • Treczoks@kbin.social
      link
      fedilink
      arrow-up
      7
      ·
      8 months ago

      Technically, it would be sufficient of they lodge a bullet into the barrel. As soon as the tank fires, the bullet will wedge between the shell and the barrel, destroying - at least - the barrel.