Roku looks to be seriously tightening its pursestrings. The company’s laying off a full ten percent of its workforce, over 300 employees, in addition to a conducting a number of other cost-cutting measures, as reported by Variety. These job cuts are just the beginning, as Roku’s also removing streaming content, consolidating office space and reducing outside service expenses. The goal here is a major reduction in the year-over-year operating expense growth rate.

  • greenskye@lemm.ee
    link
    fedilink
    English
    arrow-up
    20
    arrow-down
    2
    ·
    10 months ago

    My only real issue with Roku is the lack of a decent Ethernet port on them. 100mbit ports are too slow for 2023

    • SharkyPants@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      10 months ago

      It does feel like antiquated tech but what streaming service uses even 50+mbps streaming? The services I know of (apple, Netflix, Disney) all max out around 30mbps.

        • MooseBoys@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          10 months ago

          But could the decoder keep up? Decoders come in a variety of sizes and I doubt they’d pay the extra cost to put a 120Mbps decoder in the device when no streaming services require it.

    • MooseBoys@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      1
      ·
      10 months ago

      100mbps is too slow for 2023

      It’s appropriate for the device’s functionality. 4K HDR is at most 40Mbps. If the device supported large local storage and offline playback, you’d have a point. But given the device’s use case as a streaming client, I doubt you’d be able to find any workload that gets close to saturating the network. Even if you could find a content source that was higher than 100Mbps, it’s unlikely the decoder would be able to keep up.

      • Vent@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        ·
        10 months ago

        Bluray rips can be 80mbps+ but I’ve never had trouble streaming them on any device including roku. Important to remember that the bitrate is an average so some scenes will be well above the advertised bitrate.

        • MooseBoys@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          1
          ·
          10 months ago

          bitrate is an average

          Yes but that’s why the network and decoder are buffered. It’s also why most content is constrained at encode time to target both an average bitrate and a peak bitrate. A 200% constraint is typical, so you shouldn’t find 4K HDR in the wild at over 80Mbps peak bitrate.

          • echo64@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            The buffers on streaming devices are much smaller on these devices because of how cost reduced they are. You’re way overselling how large they are.

            Also, 80mbps is actually a pretty common avg bitrate on 4kuhd blurays. You have 100gb of disk to play with and they generally want to use it as much as possible.