UserNotFound@lemmy.world to 3DPrinting@lemmy.worldEnglish · 10 months agoPlate differencelemmy.worldimagemessage-square15fedilinkarrow-up162arrow-down17file-text
arrow-up155arrow-down1imagePlate differencelemmy.worldUserNotFound@lemmy.world to 3DPrinting@lemmy.worldEnglish · 10 months agomessage-square15fedilinkfile-text
Recently I started printing on Bambulab (previously on Průša Mini). If anyone is curious about how much difference is it
minus-squaresharkfinsoup@lemmy.mllinkfedilinkEnglisharrow-up4·10 months agoWhat are the dimensions of each plate?
minus-squareLazaroFilm@lemmy.worldlinkfedilinkEnglisharrow-up5·10 months agoAnd then there’s my 5 years old Hypercube Evolution at 300x300 mm (or 1ft x 1ft)
minus-squareTenthrow@lemmy.worldlinkfedilinkEnglisharrow-up7·10 months agoI got a CR10 Max. 450x450mm
minus-squareLazaroFilm@lemmy.worldlinkfedilinkEnglisharrow-up2·10 months agoAnd on the other end there’s my MP Select Mini 120x102mm
minus-squareTenthrow@lemmy.worldlinkfedilinkEnglisharrow-up1·10 months agoNice. I had one of those back in the day, but gave it to a friend.
minus-squareUserNotFound@lemmy.worldOPlinkfedilinkEnglisharrow-up2·10 months agoNice. Personally, I don’t think that I could find use for that size. I wanted little bigger than 220x220mm because projects
minus-squareCmdrShepard@lemmy.onelinkfedilinkEnglisharrow-up3·10 months agoI got a 300x300mm Sidewinder X2. It’s just big enough to fit my noggin and therefore print a helmet capable of fitting my noggin.
minus-squareTenthrow@lemmy.worldlinkfedilinkEnglisharrow-up1·10 months agoYeah that is a tough size if it’s all you have. When I fist got mine I had just the mini and a CR10s 400 which is 400x400mm so anything I could get away with on the little guy I did and kept the big projects on the monster.
What are the dimensions of each plate?
180x180 Vs 254x254 iirc
And then there’s my 5 years old Hypercube Evolution at 300x300 mm (or 1ft x 1ft)
I got a CR10 Max. 450x450mm
And on the other end there’s my MP Select Mini 120x102mm
Nice. I had one of those back in the day, but gave it to a friend.
Nice. Personally, I don’t think that I could find use for that size. I wanted little bigger than 220x220mm because projects
I got a 300x300mm Sidewinder X2. It’s just big enough to fit my noggin and therefore print a helmet capable of fitting my noggin.
Yeah that is a tough size if it’s all you have. When I fist got mine I had just the mini and a CR10s 400 which is 400x400mm so anything I could get away with on the little guy I did and kept the big projects on the monster.