• Badabinski@kbin.earth
    link
    fedilink
    arrow-up
    9
    ·
    3 days ago

    Alright, I have the sensor installed. It’s a bit cooler and more overcast today, but I’ll hopefully be able to get some good data.

    A graph from Home Assistant showing the current temperature of the mailbox.

    • makeshiftreaper@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 days ago

      I don’t know if this could inadvertently dox you but I’d be curious to see an hourly outside temperature too to see how much hotter a mailbox gets than outside. Based off your first graph here I’m wondering if cars having glass windows makes a greenhouse effect that would make a car hotter than a mailbox, everything else equal?

      • Badabinski@kbin.earth
        link
        fedilink
        arrow-up
        5
        ·
        3 days ago

        Seems like a worthwhile thing to do! I’m not worried about doxxing, since someone would have to go to pretty extreme measures to correlate with the exact climate where I’m at. I installed the sensor after the hottest time of day had already passed, but here’s what it looked like:

        A graph showing the outside temperature versus the temperature in the mailbox.

        I’m pretty sure the spikes in the mailbox temperature were due to cloud cover.

        • makeshiftreaper@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          3 days ago

          In my opinion this pretty conclusively proves that you can’t make a mailbox lasagna. This is the graph I looked but for my previous statement:

          A graph showing the temperature the inside of a car can reach in the sun

          And it shows that a car can hit 130-140 at temps around what you posted. Which is so much wildly higher than what you posted I do have to assume cars have some sort of greenhouse effect going that mailboxes don’t

          Finally when you consider how much of the total volume of a mailbox a lasagna covers, I have to imagine that’ll slow heating down even more! Great work!

    • rhandyrhoads@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 days ago

      By the way, just a quick tip, if you haven’t already maybe try airgapping the sensor from the metal with some foam so you’re measuring the air itself.

      • Badabinski@kbin.earth
        link
        fedilink
        arrow-up
        5
        ·
        edit-2
        3 days ago

        I have it positioned right now so that the probe tip isn’t touching any metal, but I’ll probably add a bit of foam. I have some incredibly irritating foam packing peanuts that would probably work well. I’ll go do that now.

        EDIT: here it is, in all its gloriously crappy, uh, glory:

        a picture of a temperature probe poking into the inside of a mailbox. A Styrofoam packing peanut with a hole in it has been put over the probe to stop it from touching the walls of the mailbox.