I printed a small sponge holder a while back and have been using it about a year now. Ive been seeing these ads for silicone drainers lately and decided to make something similar. This is actually v2. The first one had a separate base and grates on top but I didn’t like how it turned out. This is a combined grate and base. Printed in 4 pieces and welded together.

Video: https://streamable.com/p1g18u

  • @NoRamyunForYou
    link
    English
    27 months ago

    That’s good to hear!

    Might be the push I needed to give it a go :)

    • @[email protected]OP
      link
      fedilink
      English
      37 months ago

      Post if you do. Love seeing interesting household prints. If you’re curious, how I designed it, I took an overhead photo and brought that into Fusion360. Scaled it to proper size and then just designed on top of the canvas. Did the same thing with a silverware organizer I made a while back. Took a few test prints (just a 1mm base with the holes cut out). I had to make a few fine adjustments, but it fits perfectly now.

      • @NoRamyunForYou
        link
        English
        27 months ago

        Cool! Will do :)

        I’ve always been meaning to try the photo thing - I’ve always just reverted to making some sketches on an ipad/paper, and taking as many measurements as I can, and then printing some test fits.

        • @[email protected]OP
          link
          fedilink
          English
          27 months ago

          Same, it really depends on what I’m making, I guess. Bigger things I need to fit in/around stuff I tend to take photos. But I always do a bunch of test prints anyway.

          • @NoRamyunForYou
            link
            English
            27 months ago

            Yeah, I’ve always been meaning to get that process tightened down Abit to minimize the number of iterations required. Though I haven’t figured out what that would entail lol.

            • @[email protected]OP
              link
              fedilink
              English
              27 months ago

              The photos help for me, but I mostly just try to make as many modifications as I can for each iteration. And I print 1mm ‘base’ prints until I’m satisfied it’s ready for the final.

              • @NoRamyunForYou
                link
                English
                27 months ago

                Oh yes! haha I often do the same with the 1mm type prints :)