cross-posted from: https://sopuli.xyz/post/1726805

RMIT engineers say they’ve tripled the energy density of cheap, rechargeable, recyclable proton flow batteries, which can now challenge commercially available lithium-ion batteries for capacity with a specific energy density of 245 Wh/kg.

  • @[email protected]
    link
    fedilink
    50
    edit-2
    11 months ago

    This is such a puzzle, thank you. :)

    I checked Sci-Hub - no matches for “proton battery”, neither for “hydrogen flow battery”.

    Falling back on chemistry - I recalled that “dissolving a concentrated acid in water should be done with care”. It is exothermic, water may suddenly boil and splash acid all over the careless chemist.

    By definition, acids are substances that can easily give protons (hydrogen ions) to other chemicals. A classic reaction would be acid + base = salt + water (acid gives the H and base gives the OH, so we get H2O), the other components of the acid and base form the salt.

    If there is only water on the other side, I thought “the reaction is acid giving protons to water”. Which acid? How many protons? Those questions might determine the amount of power available. And of course - how to control the reaction and extract electrical power? Browsing Wikipedia, I came across two pages: protonation and deprotonation and a sample reaction with sulphuric acid, but found no reference to electricity production, though potential / voltage is obviously available when ions are being created and transfered.

    Then, finally I found the RMIT press release, and understood that acid is not a central participant of this reaction:

    https://www.rmit.edu.au/news/all-news/2018/mar/all-power-to-the-proton

    Some pickings:

    The working prototype proton battery uses a carbon electrode as a hydrogen store, coupled with a reversible fuel cell to produce electricity.

    It’s the carbon electrode plus protons from water that give the proton battery it’s environmental, energy and potential economic edge, says lead researcher Professor John Andrews.

    During charging, the carbon in the electrode bonds with protons generated by splitting water with the help of electrons from the power supply. The protons are released again and pass back through the reversible fuel cell to form water with oxygen from air to generate power. Unlike fossil fuels, the carbon does not burn or cause emissions in the process.

    The researchers’ experiments showed that their small proton battery, with an active inside surface area of only 5.5 square centimetres (smaller than a 20 cent coin), was already able to store as much energy per unit mass as commercially-available lithium ion batteries. This was before the battery had been optimised.

    “Future work will now focus on further improving performance and energy density through use of atomically-thin layered carbon-based materials such as graphene, with the target of a proton battery that is truly competitive with lithium ion batteries firmly in sight,” Andrews said.

    There is a photo of the three scientists with a cell and multimeter, and the meter reads 1.1559 volts, so we know the cell voltage is low, but not impractically low. A link to a scientific article and a description of the cell follows:

    “Technical feasibility of a proton battery with an activated carbon electrode”

    The latest version combines a carbon electrode for solid-state storage of hydrogen with a reversible fuel cell to provide an integrated rechargeable unit.

    During charging, protons produced by water splitting in a reversible fuel cell are conducted through the cell membrane and directly bond with the storage material with the aid of electrons supplied by the applied voltage, without forming hydrogen gas.

    (this implies that overcharging results in hydrogen formation, like in lead acid batteries - the solution is to have it vented typically)

    In electricity supply mode this process is reversed; hydrogen atoms are released from the storage and lose an electron to become protons once again. These protons then pass back through the cell membrane where they combine with oxygen and electrons from the external circuit to re-form water.

    (this leads to the question of oxygen availability on the other side, and how to ensure it’s adequate - gases are a nuisance due to their low density, but water can dissolve only so much oxygen, and this could limit the power output or storage capacity of the cell, however, if one built a flow battery, a redundantly large mass of water could be used to supply oxygen - but I’d really like to know if they used gaseous or dissolved oxygen)

    Therefore, in the proton battery, many processes in the conventional hydrogen-based energy storage system that cause energy losses and irreversible entropy increases are omitted, such as hydrogen gas evolution and compression, and the splitting of molecular hydrogen into protons in fuel cell mode.

    A summary of the scientific paper:

    The experimental results reported here show that a small proton battery (active area 5.5 cm2) with a porous activated carbon electrode made from phenolic resin and 10 wt% PTFE binder was able to store in electrolysis (charge) mode very nearly 1 wt% hydrogen, and release on discharge 0.8 wt% in fuel cell (electricity supply) mode. A significant design innovation is the use of a small volume of liquid acid within the porous electrode to conduct protons (as hydronium) to and from the nafion membrane of the reversible cell. Hydrogen gas evolution during charging of the activated carbon electrode was found to be very low until a voltage of around 1.8 V was reached. Future work is being directed towards increasing current densities during charging and discharging, multiple cycle testing, and gaining an improved understanding of the reactions between hydronium and carbon surfaces.

    So, the acid was not a reaction participant, but a proton conductor.

    If anyone has a copy of the paper, please share - it seems like it would be interesting. :)

    • ∟⊔⊤∦∣≶OP
      link
      1311 months ago

      DUDE Thank you!

      This was super interesting to read.

      Really gives me extra hope that this isn’t another vaporware battery technology.

      Perhaps the end of excessive lithium mining is in sight!

      • @[email protected]
        link
        fedilink
        411 months ago

        Really gives me extra hope that this isn’t another vaporware battery technology.

        I’ll take it with a grain of salt:

        • From the summary I didn’t see if the energy density is a cell level value or a system level value. We have to compare system level energy densities.
        • Also energy density isn’t the only thing lithium ion batteries are good at. Firstly, if the cell at its core is a reversible fuel cell with nafion membrane, the dynamics of the cell will be comparable to PEM fuel cells. Lithium-ion batteries can deliver full power instantly without an issue. With PEM fuel cells you have to be more careful: it’s possible to flood the membrane with water or dry it up if you change power too quickly, which is why their response time (time from set point change to actual delivery of full power) is usually limited to about one minute. Secondly, how good or bad is the calendric and cyclic aging and recyclability of the new battery? Lithium-ion has come a long way concerning lifetime - recyclability not yet, sadly.
        • With Sodium-ion batteries there’s another, more mature and similarly environmentally-friendly technology already on the market. And while I wouldn’t have thought that it made sense, chinese manufacturer CATL already has built Sodium-ion batteries for cars, and (sadly) that’s the far more important market for batteries compared to stationary ones.
  • @[email protected]
    link
    fedilink
    1711 months ago

    What’s the reactions? Proton battery sounds like a media-friendly name for a hydrogen fuel cell?

    Is it a H fuel cell?

    • ∟⊔⊤∦∣≶OP
      link
      511 months ago

      Electricity flows when there is a voltage difference, ie a more positive side and a more negative side that wants to equal itself out.

      This battery uses protons (positive charge) to make a voltage difference.

      When the protons flow from one side to the other, electricity is generated.

      That’s the best I can do I’m afraid.

      • @[email protected]
        link
        fedilink
        5
        edit-2
        11 months ago

        I’ll try too.

        Water can be split with electricity into hydrogen and oxygen atoms, which quickly combine into hydrogen and oxygen gas molecules.

        This battery stores energy by using an acid environment to preserve the hydrogen atoms as single and electrically charged ions (weakly combining them with opposite-charge ions from an acid) and uses voltage to attract them into a carbon storage medium, where they de-ionize with the help of electrons from a wire and get deposited in porous carbon as single hydrogen atoms.

        Meanwhile, oxygen is formed on the other electrode, far across a membrane. The oxygen cannot come across the membrane and combine with the hydrogen or carbon. Oxygen atoms react among themselves and form oxygen gas molecules.

        When time comes to discharge, voltage across the terminals is removed and a load with resistance is installed. Hydrogen atoms stored in carbon give away their electrons, which flow across the wire (peforming work at the load) and ionize oxygen atoms on the other side. This creates a voltage gradient which attracts hydrogen ions to leave the carbon substrate and travel across the medium (acid conductor and membrane) to join with the oxygen ions and form water.