I have always wanted to try printing larger, using a bigger nozzle - just got around to swapping to a .6mm in my MK3S+. Printed a gift for a childhood friend. 300% size. Took just under 10 hrs. With the slicer settings on .4mm it was over 17hrs.

  • RubberElectrons@lemmy.worldEnglish
    8·
    7 months ago

    When it works, it’s pretty great. I’ve got a weird overextrusion issue to fix on my MK3S+ with the 0.6 nozzle, but the prints themselves are tougher and faster.

    • Contend6248@feddit.deEnglish
      2·
      7 months ago

      Did you play around with different filament settings or presets? Most importantly extrusion multiplier?

      Measuring the filament might be a good idea too, maybe slight differences are becoming visual with a bigger nozzle

      • RubberElectrons@lemmy.worldEnglish
        1·
        7 months ago

        Thanks for the ideas, yeah I’ve tried playing around with the presets and such, and I’m fairly certain the filament itself is good, matterhackers pro PETG.

        When I have a moment I’ll be trying to make an extrusion tower to test settings.

        • Aux@lemmy.worldEnglish
          1·
          7 months ago

          PETG is very leaky. It’s not a big deal with 0.4, but becomes a pain with 0.6. Try to set a higher printing speed.